LG OLED Models Supported by OLED Control

Quick Answer

OLED Control is designed for compatible LG OLED and webOS televisions that expose the required local-network controls. Compatibility is not one yes/no flag: discovery, remote buttons, inputs, apps, picture settings and advanced controls can each differ by model, region and firmware.

The safest compatibility test is to pair the exact television and verify the controls you need. A model appearing in a settings guide does not guarantee that every advanced command remains available on every firmware.

Models covered by this wiki

OLED Control has dedicated picture-setup guidance for these widely used series:

• LG C1, C2, C3 and C4;
• LG G1, G2, G3 and G4.

Those guides describe model-year considerations, not a promise of identical app capability. LG sells different screen sizes and regional variants under the same family name, and firmware can change exposed settings.

Other LG OLED or webOS TVs may support basic local-network control. Verify them in the app before purchasing access for a specific advanced feature.

Compatibility levels

Discovery and pairing

The TV must be reachable on the same local network and must accept the pairing request. Guest-network isolation, VPNs and router rules can block discovery regardless of model.

Basic remote control

Power, volume, navigation, inputs and app launching depend on commands reported or accepted by webOS. Wake behavior is a separate capability and can depend on standby-network settings.

Picture settings and presets

Picture controls vary by input, picture mode and signal. SDR, HDR10 and Dolby Vision can expose different settings. A command available in Cinema mode may be locked in Game Optimizer or PC mode.

Advanced controls

Advanced or service-level controls are the least portable. LG can rename, restrict or remove entries by firmware and generation. Never use a command intended for another model merely because the menu label sounds familiar.

Find the exact model and firmware

Use the TV's normal support/about menu or rear label to record:

• full model number, including regional suffix;
• screen size;
• webOS version;
• firmware version;
• country or region.

Provide all five when reporting a compatibility problem. “LG C3” alone may omit details needed to reproduce it.

Verify before relying on a feature

1. Complete First Setup.
2. Test volume and navigation.
3. Confirm the input and app lists match the TV.
4. Play SDR, HDR10 or Dolby Vision content before checking that mode's picture settings.
5. Record any rejected command and the active picture mode.

OLED Control is not an LG-authorized service tool and does not rewrite television firmware. Availability in an older screenshot, forum post or different regional model is not proof of support on your television.

Settings guides

• C1-C4 settings hub
• HDR gaming setup
• PC monitor setup
• Service-menu risks

Sources

• OLED Control on the Apple App Store
• LG Support: find product help by model
• LG: TV network connection troubleshooting

How compatibility should be evaluated

“LG OLED” is a product family, not one protocol guarantee. The relevant facts are the exact model suffix, model year, webOS generation, firmware and network-control capabilities exposed by that television. OLED Control can only use commands the TV makes available and the current app implements.

Start with ordinary discovery and pairing rather than a marketing-name assumption. A television that appears, accepts its on-screen prompt and responds to volume/navigation has the basic control path. Advanced picture options, app launching, wake and hidden settings each require separate capability checks.

Model-year expectations

Recent LG C- and G-series webOS OLEDs are the primary practical target, but behavior is not identical across C1, C2, C3, C4 and later families. Menu names moved, Game Optimizer evolved, input capabilities changed and some service entries were locked or removed. B- and A-series models can expose a different gaming or HDMI feature set even in the same year.

Screen size also matters. A 42-inch C2 and a larger C2 share family software but differ in panel implementation and typical use. A 97-inch model can have different refresh limits from smaller models in a later family. Never infer hardware support from the first letter alone.

Older webOS televisions may still provide network controls while lacking commands assumed by newer presets. Test the actual TV; do not promise support based only on an OLED badge.

Features that must be checked separately

• Discovery and pairing: local network and TV authorization.
• Wake: standby network behavior and router delivery.
• Inputs/apps: only entries reported by that webOS installation.
• Picture controls: active signal and mode can lock options.
• HDR gaming: console, port, cable, model and firmware all matter.
• Service controls: undocumented, variable and not a compatibility requirement.

A successful pairing does not mean the app can calibrate a panel, configure HDMI output or bypass firmware protection. Those are outside normal network-remote scope.

Find your exact model and firmware

Use the TV's supported About/TV Information screen and the rear label when accessible. Record the complete code, not just “C2.” Regional suffixes can identify tuner, market and support channel. Record the software version before reporting a missing command.

Do not enter the service menu to discover routine model information. LG's consumer settings and support site are sufficient. Firmware should come from the TV update function or LG support for that exact regional product.

Unsupported or uncertain cases

If discovery never succeeds after same-LAN, permission and isolation checks, compatibility remains unproven. TVs running non-webOS platforms, commercial displays, signage products and modified firmware should not be assumed compatible. A model may also expose basic remote control but reject an advanced setting.

When reporting uncertainty, provide model suffix, firmware, country, app platform and the command attempted. That evidence is more useful than expanding a static “supported list” that becomes inaccurate after releases.

Compatibility FAQ

Does every LG C-series model support the same controls?

No. Model year, size, firmware and active signal change availability.

Is an LG television with webOS automatically supported?

Not automatically. It must expose a compatible local-control path and accept pairing; individual features still need verification.

Does OLED Control add 120 Hz, VRR or Dolby Vision?

No. Those are hardware/source features. The app can operate supported TV state but cannot create missing capabilities.

Can a firmware update remove a control?

Firmware can rename, restrict or alter behavior. Record versions and use supported updates before diagnosing.

Authoritative references

• LG Support — software and manuals by exact product
• LG — TV software update guidance
• OLED Control App Store listing