First Time Setup Guide

This guide will walk you through the complete setup process for Oled Control, from initial launch to successfully connecting with your LG OLED TV.

Pre-Setup Checklist

Before starting, ensure you have:

• ✅ Oled Control app installed on your device
• ✅ LG OLED TV (2018 or newer recommended)
• ✅ Both devices connected to the same Wi-Fi network
• ✅ TV is powered on and connected to the internet
• ✅ Network permissions granted to the app

Step 1: Launch and Initial Permissions

First App Launch

1. Open Oled Control from your device
2. Read the welcome screen and tap "Get Started"
3. Review the privacy policy and terms of service
4. Accept the terms to continue

Grant Required Permissions

The app needs several permissions to function:

iOS Permissions

• Local Network Access: Required to discover your TV
• Notifications: For connection status and updates (optional)

Android Permissions

• Network Access: Required for TV communication
• Device Location: Needed for network discovery on Android 10+
• Notifications: For status updates (optional)

macOS Permissions

• Network Access: Required for TV discovery
• Accessibility: For advanced control features (optional)

Important: Denying network permissions will prevent the app from working properly.

Step 2: TV Discovery and Connection

Automatic TV Discovery

1. Wait for automatic scan (usually 10-30 seconds)
2. Select your LG TV from the discovered devices list
3. Verify the TV model matches your device

Manual TV Connection

If automatic discovery fails:

1. Tap "Connect Manually" or "+"
2. Enter your TV's IP address (found in TV settings)
3. Input the TV name for identification
4. Test the connection

Finding Your TV's IP Address

Method 1: Through TV Settings

1. Go to Settings > General > Network
2. Select Wi-Fi Connection or Wired Connection
3. Note the IP Address shown

Method 2: Using Your Router

1. Access your router's admin panel
2. Look for Connected Devices or DHCP Clients
3. Find your LG TV in the list

Step 3: Pairing Process

TV Pairing Confirmation

1. A popup will appear on your TV screen
2. Select "Allow" on the TV remote
3. The app will confirm connection within a few seconds

Pairing Troubleshooting

If no popup appears:

• Ensure both devices are on the same network
• Check TV's network connection
• Restart both TV and app

If pairing fails:

• Try turning TV off and on
• Restart the Oled Control app
• Check firewall settings on your network

Step 4: Basic Configuration

TV Settings Verification

The app will verify it can access:

• Power controls (on/off, standby)
• Input switching (HDMI, USB, etc.)
• Volume controls (up, down, mute)
• Display settings (brightness, contrast)

Initial Settings Backup

1. Allow settings backup when prompted
2. Create a settings profile for easy restoration
3. Name your TV configuration for identification

Permission Levels

Choose your preferred access level:

Basic Access

• Power controls
• Volume adjustment
• Input switching
• Basic picture settings

Advanced Access

• Service menu access
• Professional calibration tools
• Advanced picture controls
• System-level settings

Note: Advanced access requires additional permissions and may void warranty if misused.

Step 5: Interface Customization

Home Screen Layout

1. Choose your preferred layout:

   • Classic Remote: Traditional TV remote layout
   • Control Center: Modern grid-based interface
   • Custom Layout: Create your own arrangement

2. Select primary controls for quick access:

   • Volume and channel controls
   • Input switching
   • Picture mode selection
   • Favorite settings

Theme and Appearance

1. Choose a theme:

   • Auto: Matches system settings
   • Light: Bright interface
   • Dark: Easy on the eyes
   • OLED Black: True black for OLED devices

2. Adjust control sensitivity for gestures and sliders

Step 6: Quick Feature Tour

Remote Control Tab

• Virtual remote with all standard buttons
• Gesture controls for easy navigation
• Custom macros for multi-step commands

Settings Tab

• Picture settings: Brightness, contrast, color
• Audio settings: Volume, sound modes
• Network settings: Connection management

Premium Features Tab

• Advanced calibration tools
• Service menu access (with proper permissions)
• Professional settings for enthusiasts

Step 7: Test Your Setup

Connection Test

1. Turn TV on/off using the app
2. Change inputs between HDMI ports
3. Adjust volume up and down
4. Switch picture modes (Standard, Cinema, etc.)

Performance Check

1. Test response time - commands should execute within 1-2 seconds
2. Verify stability - connection should remain active
3. Check all tabs work without errors

Common Setup Issues

Connection Problems

TV not discovered:

• Verify same Wi-Fi network
• Check TV's network settings
• Restart router if needed

Slow response:

• Check Wi-Fi signal strength
• Reduce distance between devices
• Close other network-intensive apps

Permission Issues

"Access Denied" errors:

• Re-grant network permissions
• Check TV's security settings
• Update app to latest version

Limited functionality:

• Verify advanced permissions granted
• Check TV firmware version
• Enable developer options if needed

Next Steps

Now that setup is complete:

1. Learn basic controls to master the interface
2. Explore settings optimization for better picture quality
3. Discover premium features for advanced users

Advanced Setup Options

Multiple TV Setup

To connect additional TVs:

1. Tap the "+" button in the TV list
2. Repeat the discovery process for each TV
3. Name each TV clearly for easy identification
4. Switch between TVs using the device selector

Network Configuration

For optimal performance:

1. Use 5GHz Wi-Fi when available
2. Ensure strong signal strength for both devices
3. Configure QoS settings on router for priority
4. Consider ethernet connection for TV if possible

Setup complete? You're ready to experience full control of your LG OLED TV!